Corsair R100 Drive Caddy replacement

I broke the other ejector handle of the drive caddy yesterday.  Both of the handles broke off separate times at roughly the same spots where they narrow out for the stubs.

I have made some reliability changes to the ejector handles.  They are now separate and uniform so the bending stress is spread out over the entire length. The cut off part of the rail also acts as a stop for the levers.

I have very little reasons to mount a 2.5" drive on the same caddy as the SATA connectors do not line up with my Corsair 100R Hotswap style drive bay upgrade.

Files at my github project page